Crush and Run Crush and run is one of the cheapest materials for a gravel driveway, costing around $0.40 per square foot. The cost each cubic yard is around $20, while the cost per ton is approximately $28. The price varies depending on the quality of the rock but overall it is one of the most affordable materials for a driveway.
The first step in determining the cost of your driveway is to figure out how many yards you will need. A crushed rock driveway should be at least 18 inches deep and compaction will help it hold water better. You can buy ready-made gravel driveways or have a contractor excavate a hole and pour concrete over the top for a custom look.
The next step is to choose a type of rock that fits your budget and meets your design needs. There are several types of crushed rock available, including ballast, base, and premium. Ballast is the cheapest option and only comes in a few sizes; it's perfect for creating a flat surface. Base rock is larger and looks good when used as an accent piece in your driveway or border. Premium rock is finer and uses less material than base rock but costs more. It can be used alone or with other types of rock to create a unique look that fits your style.
The final step is to decide where to get your rock crushed.
Crush and run gravel costs $24 to $34 a ton, about $50 per cubic yard, or $0.50 to $2.00 per square foot, making it one of the most affordable materials. This blend consists of limestone, trap rock, granite, crushed rock, sand, and stone dust. It is used as an erosion control measure on roads and other open areas.
The cost of crush and run varies depending on the type of material you need and where you get it shipped to. The price generally increases with size because larger pieces are harder to handle and transport. Limestone is the least expensive component - costing only $10 to $20 per ton - while granite can be more than $100 per ton. Trap rock is cheaper than gravel made from other types of stone but still more expensive than dirt ($5 to $15 per ton).
Trap rock is a coarse grade of gravel used for road construction and other development projects. It is made by screening rubble left over after quarrying operations have removed the finer stones. The term "trap" comes from the fact that this material catches and holds wheel traffic like a trap door. The word "gravel" is used instead of "rock" if the material is less than 2 inches (5 cm) in diameter. Otherwise, it would be called "crushed rock."
Crush and Run costs roughly $20 per cubic yard and $28 per ton. This material, also known as crusher run, quarry process, dense grade aggregate, or road stone, is made up of crushed rock and dust. The density of the product depends on the amount of dust in the mix and whether or not it has been compacted during storage or transport.
Road builders prefer crush-and-run because it is easy to handle with equipment and does not need to be mixed with other materials to make different types of asphalt. The price per ton varies depending on the color and quality of the product but is usually within $10 of the total cost for a cubic yard.
Color is the main determinant of price for crush-and-run. White products are less expensive than colored ones. This is because white rock has more void space inside it than colored rock; therefore it can hold more oil. Also, white rock tends to have fewer small rocks in it so it sells for less per ton than colored rock.
The quality of the crush-and-run affects its price too. If it has been heat treated (see below) the price goes up. If it is gray rather than white then it will also tend to be pricier.