How much should I charge for trenching?

How much should I charge for trenching?

The average cost of digging a trench, including equipment and labor, is $8 per linear foot. Doing it yourself removes the need for manpower and reduces the cost to an average of $2.25 per linear foot. Support supplies and cleaning are included in the labor rate. The average trench is 24 inches deep and 8 inches broad. Trenching width depends on the type of service required.

Trenches can be used for many different purposes such as water distribution, power transmission lines, gas pipes, cable TV wires, and storm drains. The depth and size of the trench depend on the purpose it serves. For example, if you need to distribute water then a shallow trench (with no more than 2 feet of depth) will do; if you need to place a pipe inside another pipe (such as a water line inside a sewer line) then a deeper trench (up to 12 feet deep) will do.

The cost of trenching varies depending on the company that does the work and the type of equipment they use. Trenching is a manual process so the cost of labor may affect how much you can charge for your service. For example, if you hire one laborer to dig two trenches then the cost of labor would be half of what it would be if four people were employed.

The type of equipment used by a trencher driver affects the total cost of digging a trench.

How much does it cost to cover a ditch?

Trenching Costs Per Foot

Equipment (Trencher)$1.75 – $2.50
Labor*$2.25 – $9.50
Total Per Linear Foot$4 – $12
Total Per 100 Linear Feet$400 – $1,200

How much should I charge for excavation?

A typical residential excavation work costs between $1,437 and $5,285, with a $3,266 average. Residential jobs are subject to project bids, even though most businesses charge between $40 and $150 per hour. Project bids are based on cubic yards of soil carried, with prices ranging from $50 to $200 per cubic yard. Length of time required for an excavation job will affect price. An excavation can take from one day to more than a week to complete.

The cost of excavating a commercial property ranges from $8,000 to $20,000, with an average of $15,000. The price is generally based on how many square feet of space is being dug up as well as the type of material that will have to be removed. If there is rock or dirt under the surface, it must first be removed before any other work can be done. This will increase the cost of the project.

In general, the more yard you have to dig up, the more expensive the excavation will be. Material such as brick, stone, and concrete require special equipment that only some companies have access to. They can also lead to more extensive damage beyond what would normally be expected for household dirt. For example, if there is a sewer line underneath your home's foundation, the technician will need to know this in order to avoid breaking it when they dig up for plumbing repairs.

Some homeowners may want to save money by doing their own excavations.

How long does it take to dig a trench with a shovel?

A 100-foot-long trench takes roughly 12 hours to dig. Trenching is a large job that requires a good deal of effort and time, so plan on spending most of the day when you're digging a trench.

It's helpful to have someone else help you out during trenching days. This person can hold down the ropes while you work or cover something up if necessary.

The depth of a trench should be at least as deep as the height of the wall you are trying to build. Trenches should be wide enough for a wheelbarrow to fit through without touching the sides. The length of the trench should be based on the type of soil you are working with and how much dirt it will hold. Loose soils such as sand can be spread out over a fairly large area while clay soils tend to be more narrow.

Clay soils need to be dug deeper than other types of soil because they will absorb more water which could cause them to become soft and leaky if not done properly. If you do decide to use clay soil as your main material, make sure to add some coarse gravel or stone to its surface to prevent pipes from collapsing due to excessive weighting.

How much does it cost to install a trench drain?

Installing a Trench or Channel Drain Depending on the grate and channel material, the typical cost of building a trench drain ranges from $30 to $150 per linear foot (plastic, metal, or concrete). Installing a PVC drain pipe drain typically costs $10-$20 per foot. Cement block or other hard surfaces may be more expensive because they require special care during installation.

The cost of a trench drain depends on the size of the job and the type of soil you are working with. The deeper the hole and the harder the soil, the more expensive it will be. Trenches that are less than 18 inches deep or that go through sand or gravel can be done for less than $100. Larger trenches that reach depths of 36 inches or more usually require a professional excavator because they are too big for most homeowners to handle. Trenches that pass through rock or concrete require special equipment that can break down the rock or concrete so that it can be removed. This is called "relining" the trench

Trench drains come in many sizes and shapes depending on what type of project you are trying to accomplish. For example, they can be round, square, or flat. Some people also call them "channels". They can be made of steel, iron, or plastic.

About Article Author

Teri Degarmo

Teri Degarmo is a crafty, coupon-clipping mom who loves to shop for her family. She has been writing about her finds for years, and now wants to share her knowledge with other moms so they too can have an abundant life. Teri lives with her family in a small house that was built by her husband's grandfather 100 years ago.

Related posts