In addition to leaking water, a faulty O-ring can allow air into the system, interfering with efficient filtering. Installing a new O-ring entails sealing the portion to guarantee that the filter is waterproof under pressure. Turn off the electricity to the circulation pump at the circuit breaker box switch. Remove the cover from the valve body spray lubricant inside the valve body.
Lubricate the stem of the valve with oil before installing it. This will reduce the amount of force required to turn it. If possible, do not open the valve while it is running.
Check the wiring to be sure that it is not grounded. If it is, have your electrician correct the problem before proceeding. At the end of the season, remove the cover from the valve body and flush it out with water. Check for debris that may have lodged in the valve body. Remove any corrosion or scale that has formed on the internal surfaces of the valve body or on the springs or diaphragms within the valve. Use soap or sandpaper wrapped in cloth to clean these areas.
If necessary, repair any worn parts of the valve mechanism (such as the springs or diaphragms). When replacing these items, make sure that you get one with the same number of coils. Extra coils in the spring will provide more resistance when opening the valve, which could cause unnecessary energy losses if you have an automatic pool cleaner.
Here's the only solution you'll ever need: Simply take the plug out of the ring and replace it with the rubber stopper. Insert the flag dripper into the stopper, then connect the tubing so that it hangs straight down and flows to the air pump. Simply leave the pump running 24 hours a day, seven days a week, and it will maintain the ring completely inflated without you having to correct any leaks!
The ring is your friend and protector against overflow damage. It's also important that you keep an eye on the ring and pump it up as needed. If the ring leaks, let some water drain out of it until it stops, then repair the leak immediately. You can usually find replacement rings at home improvement stores. They're not expensive.
If your ring is damaged but still floats, remove it and cut off any ragged edges that might cause it to leak later. Then wrap it in plastic or aluminum foil and throw it away. Do not try to fix this problem yourself; it's dangerous work. Contact a local pool service company instead.
To replace the O-ring, dismantle the faucet from the handle down.
If your pump isn't holding prime and the O-ring on your pool sand filter is old and strained, the O-ring may be leaking air and needs to be replaced. This video demonstrates how to replace the O-ring on your pool sand filter. For more information on pool filters, see our article on what type of filter is best for your pool.
Swimming pool O-rings are found throughout pool equipment. Pumps, filters, heaters, valves, chlorinators, skimmers, cleaners, and other similar devices are all made using tiny rubber rings. These rings are called "O-rings" because they fit over something else with a circular cross section such as a hole or groove.
No, not universally. Some brands of pumps may have their own unique type of O-ring used in their construction. Other factors can also affect the choice of O-ring including temperature, material quality, and manufacturing process. However, any swimming pool pump will have some type of universal ring that will fit over its shaft or bearing housing.
An O-ring's purpose is to create an airtight seal when it is placed between two objects that rotate relative to one another. This is true for swimming pool pump O-rings as well as automobile engine O-rings. The difference is that swimming pool pump O-rings must be able to withstand harsh chemicals and physical forces over time while automobile engine O-rings only need to provide a watertight seal during vehicle assembly (and sometimes later under light loading conditions).
There are two types of swimming pool pump O-rings: metal and plastic. Metal rings are excellent at sealing against water but tend to wear out faster if exposed to chemicals.
Replace the tank o-ring and add a thin coating of pool lubricant to the inside of the tank. Replace the lid and tighten the clamp band all the way. If the leak persists, release the clamp band, adjust it, and retighten it. Filter Tank Cracked: If your filter tank has a pinhole leak or a full-blown break, the only cure is to replace it. Check with your local pool shop for recommendations on how much it will cost.
If you decide to replace the tank yourself, first check to make sure that's what needs to be done. A cracked tank can cause water to spill out when you open or close the lid. This could lead to flooding in your yard or tunnel. The filter media inside the tank may have been damaged by water leaking into it over time.
To repair or replace your filter tank, you'll need tools and parts that you can find at a hardware store. It's best to hire a professional pool service company instead. Hiring someone to take care of this job for you saves you time and money. In addition, these professionals know which filters are appropriate for your pool size and design. They also have the equipment needed to get the job done right.
Cleaning the Leaks: Once you've identified the source of the leak, it's time to clean up the mess. First, shut off the main valve to the pool. This prevents any more water from entering the system while you fix the problem.