[Compatible with a 12W power supply] 1.5A, 1500mA Belker Voltage Adjustable 12W 3V 4.5V 5V 6V 7.5V 9V 12V [BN] 1A Max. Universal AC/DC Adapter Power Supply for Household Electronics [BN] Belker 30W Universal AC/DC Power Adapter for Home Electronics Routers, TV boxes, and CCTV cameras with LCD displays 3 volts, 4.5 volts, 5 volts, 6 volts, 7.5 volts, 9 volts, and 12 volts Maximum current: 0.5A, 1A, 1.5A, 2A, 2.5A, and 2500mA Output voltage range: 7.5v to 24v Dimensions: H71 x W32 x D3mm Weight: 0.6kg (1pounds)
Your television's remote control receiver needs power in order to work. The type of power supply you need depends on the brand and model of your television.
Most modern televisions have two separate circuits that control the lights on the volume knob and the channel selector buttons. One of these circuits requires 5 volts to operate correctly, while the other requires 12 volts. Your television's manual will tell you which button controls which circuit, so look under "power management" or "volume control" for instructions on how to connect it up. If you cannot find this information in the manual then call the manufacturer with your radio-control transmitter code before you start wiring things up.
In conclusion, most modern television remote controls require 5 volts to work and can handle up to 1 ampere of current per button. Some older models might only support remote controls that use four small rubber pads instead of wires to make contact, which would require 6 volts to operate correctly.
Amperage is the quantity of power consumed by your gadget. The adapter you purchase must be capable of producing AT LEAST the number of amps required by your device. If your device specifies 12V 3A, a 3A adapter can manage the load, but so can a 4A or 5A adapter. You'll want to check the amperage capacity of your adapter before buying it.
The type of plug on your device may also affect the choice of adapter. For example, if your device uses an European two-pin plug, you should look for an adapter with two round pins. Otherwise, you might be forced to use an adapter with three flat pins, which could damage your device over time.
Finally, make sure that your new adapter has enough wattage capacity for your device. For example, if you plan to use your device with this adapter at full strength, you should get an adapter that produces at least as much current as the maximum current requirement of your device. In other words, if it requires 300mA, get a 300mA adapter.
You should also check the wattage rating of your adapter. It should be more than enough to charge your device completely. For example, if your charger contains a 200W adapter and you have a 250W battery, then you're good to go. However, if you have a 400W battery, you'll need an adapter that produces at least 500W to charge it fully.
0.5 volts to 5 volts, and up to 1 amp.
A typical television has several USB ports. The number and type varies depending on the model. But they all work about the same way. They are either 3 volts or 5 volts, and they can deliver up to 1 amp each. That's enough power to charge most smartphones or tablets using only one of these ports.
In practice, this means that you can connect a computer battery charger to a USB port on a television set to recharge your phone or tablet while watching movies or surfing the web. Of course, if you want to use the television as its name suggests, you'll need to connect it to a DVD player or other device that uses a USB port for storage or playback.
Some modern televisions have two separate sets of USB ports. One group of ports will supply 0.5 volt devices such as speakers or microphones. The other group will supply higher-voltage devices such as lamps or electric knives.
Televisions vary quite a bit when it comes to their power supplies. Some use single batteries that must be replaced periodically.
A 3-amp fuse should be installed in plugs for appliances rated up to 700 watts (coloured red). For example, a 3A fuse may power a table lamp, a standard light, a television, video, a computer, a mixer, a blender, a fridge, a freezer, a power drill, a jig saw, and a soldering iron. A 4-amp fuse should be used for appliances that use more than one wire (such as a three-wire light bulb), or those that are heavier than 100 watts (such as a hair dryer or vacuum cleaner). Fuses should be selected by their amperage rating (3A or 4A). The number next to the name of the fuse indicates its amperage rating.
The type of plug you need depends on what kind of connection you have now with your TV. If it's an ordinary stereo radio-type plug, then you need a RCA plug adapter. If it has a round, flat jack like most home computers' sound cards have, then you need a Y-cable or a straight-through cable.
If you're not sure which type of plug is in your TV, contact the manufacturer for advice before you start wiring it up. They'll be able to tell you if it needs a RCA plug adapter or not. You can also search for "television plug" on Amazon or eBay to find other types of plug adapters that work with this kind of socket.
This page contains power adapter specs for the majority of Seagate devices that require external power sources. To ensure compatibility, please utilize these specs when changing your adaptor. If you have any questions about which power adapter will work with your specific device, please contact an Amazon Customer Service representative.
You will need the following items to make this power supply work: A transformer having an output voltage of 14v-35v AC and an output current ranging from 100mA to 1A, depending on the amount of power required. (In a damaged alarm clock, I discovered a 16v 200mA transformer.) Resistors for use as heat sinks - at least one resistor should be larger than 2W and smaller than 10W. Inductors can also be used in place of or in combination with resistors. A capacitor for use as a filter - at least 100uF should be used, but the value depends on how much power is being drawn by the circuit.
The first thing you need to do is find some way to transform the 110v line into a usable form of electricity. Most homes have a 120v line coming into their walls, so we'll start there. We can't just connect the two wires together because they're not the same size; instead, they have different colors. The black wire goes to the body contactor, which controls what lights go on when someone opens a door or turns off a light switch. The white wire goes to something called a "commutator", which is actually just a fancy name for a motor driver chip. These are available online for about $10-$20.